#This is to simulate the coherent brem
# $(P) records are in the cbrem IOC
# $(G) ones are the goni motors
#
#############################################################
#These are all to mock up ones on real iocs #################
record(ao, "$(G)X"){
}
record(ao, "$(G)Y"){
}
record(ao, "$(G)ROLL"){
}
record(ao, "$(G)YAW"){
}
record(ao, "$(G)PITCH"){
}


record(ao, "$(G)X:RLV"){
}
record(ao, "$(G)Y:RLV"){
}
record(ao, "$(G)ROLL:RLV"){
}
record(ao, "$(G)YAW:RLV"){
}
record(ao, "$(G)PITCH:RLV"){
}

record(ao, "$(G)X:MOVN"){
}
record(ao, "$(G)Y:MOVN"){
}
record(ao, "$(G)ROLL:MOVN"){
}
record(ao, "$(G)YAW:MOVN"){
}
record(ao, "$(G)PITCH:MOVN"){
}
record(ao, "$(G)RADIATOR_ID"){
   field(VAL,"227")
}
record(ao, "$(G)RADIATOR_INDEX"){
      field(VAL,"2")
}
record(stringout, "$(G)RADIATOR_NAME"){
      field(VAL,"Ken test radiator")
}

record(ao, "$(P)DIAM227_ID"){
      field(VAL,"2")
}
record(ao, "$(P)DIAM227_PARA_PITCH"){
      field(VAL,"0.002")
}
record(ao, "$(P)DIAM227_PARA_YAW"){
      field(VAL,"-0.001")
}
record(ao, "$(P)DIAM227_PERP_PITCH"){
      field(VAL,"1.23")
}
record(ao, "$(P)DIAM227_PERP_YAW"){
      field(VAL,"-0.4")
}
record(ao, "$(P)DIAM227_PHI"){
      field(VAL,"0")
}
record(ao, "$(P)DIAM227_THETA"){
      field(VAL,"0")
}
record(ao, "$(P)DIAM227_PHI0"){
      field(VAL,"0")
}
record(ao, "$(P)DIAM227_PHI022"){
      field(VAL,"0")
}

####################################################################
##### These need to go in to the real ioc

record(ao, "$(P)INIT"){
      field(VAL,"0")
}
record(ao, "$(P)COH_INCREMENT"){
      field(VAL,"0.0001")
}
record(ao, "$(P)ORTH_INCREMENT"){
      field(VAL,"0.001")
}
record(ao, "$(P)COH_PLANE"){
      field(VAL,"0")
}

record(ao, "$(P)DIAM227_PARA_MODE"){
      field(VAL,"1")
}
record(ao, "$(P)DIAM227_PERP_MODE"){
      field(VAL,"1")
}

record(ao, "$(P)SCAN_STATE"){
      field(VAL,"0")
}

record(stringout, "$(P)SCAN_AXIS"){
      field(VAL,"STONE")
}

record(ao, "$(P)SCAN_POS1"){
      field(VAL,"3")
}

record(ao, "$(P)SCAN_STEP"){
      field(VAL,"0")
}

record(ao, "$(P)SCAN_NSTEP"){
      field(VAL,"180")
}

record(ao, "$(P)SCAN_VOFF"){
      field(VAL,"0")
}

record(ao, "$(P)SCAN_HOFF"){
      field(VAL,"0")
}

record(ao, "$(P)SCAN_TIME"){
      field(VAL,"2")
}

record(ao, "$(P)HODO_STATE"){
      field(VAL,"2")
}
record(ao, "$(P)MICRO_STATE"){
      field(VAL,"2")
}
record(ao, "$(P)LOWG_STATE"){
      field(VAL,"2")
}

record(waveform, "$(P)EMAP"){
        field(NELM, 500)
        field(NORD, 500)
        field(FTVL, DOUBLE)
        field(PREC, "2")
}
record(waveform, "$(P)RAW_SCALERS"){
        field(NELM, 500)
        field(NORD, 500)
        field(FTVL, DOUBLE)
        field(PREC, "2")
}

record(waveform, "$(P)ENH_SCALERS"){
        field(NELM, 500)
        field(NORD, 500)
        field(FTVL, DOUBLE)
        field(PREC, "2")
}

record(waveform, "$(P)ENH_REF"){
        field(NELM, 500)
        field(NORD, 500)
        field(FTVL, DOUBLE)
        field(PREC, "2")
}

record(waveform, "$(P)AMO_SCALERS"){
        field(NELM, 500)
        field(NORD, 500)
        field(FTVL, DOUBLE)
        field(PREC, "2")
}

record(ao, "$(P)LOWG_SCALER"){
      field(VAL,"2")
}

record(ao, "$(P)N_SCALERS"){
}


record(stringout, "$(P)HODO_SCALER_NAME"){
}
record(stringout, "$(P)HODO_EMAP_NAME"){
}
record(stringout, "$(P)MICRO_SCALER_NAME"){
}
record(stringout, "$(P)MICRO_EMAP_NAME"){
}
record(stringout, "$(P)LOWG_SCALER_NAME"){
}


#These mock up scalers that would be coming from other hardware.

record(waveform, "X:HODO_SCALERS"){
        field(NELM, 352)
        field(NORD, 352)
        field(FTVL, DOUBLE)
        field(PREC, "2")
}
record(waveform, "X:HODO_EMAP"){
        field(NELM, 352)
        field(NORD, 352)
        field(FTVL, DOUBLE)
        field(PREC, "2")
}
record(waveform, "X:MICRO_SCALERS"){
        field(NELM, 96)
        field(NORD, 96)
        field(FTVL, DOUBLE)
        field(PREC, "2")
}
record(waveform, "X:MICRO_EMAP"){
        field(NELM, 96)
        field(NORD, 96)
        field(FTVL, DOUBLE)
        field(PREC, "2")
}

record(ao, "X:LOWG_SCALER"){
      field(VAL,"2")
}