#---------------------------------------------------------------
#
# 2015/07/08 Kei Moriya
#
# This file explains the data taken with radioactive sources
# for the polarimeter.
#
#---------------------------------------------------------------

All source data taken with the DAQ originally go to
/gluonfs1/gluex/Subsystems/TPOL/data/calib_[RUN NUMBER].0
on the gluon cluster.

The files can then be copied to
/volatile/halld/home/kmoriya/TPOL_data
for storage.

When running over these files, copying to the scratch disk
(/u/scratch/[username]) is recommended since the disk
readout speed is much slower on this volatile disk.

Run         date      	 source	     events	readout threshold	comments
10          2015/07/06   241 Am      6057  	850                   	check DAC values set pedestals near 500
11          2015/07/06   241 Am      330k       850                   	Take long run.
12          2015/07/06	 241 Am      1M         850                   	Wanted 1M events

23          	     	 137 Cs      0          540                   	Wanted beta events, nothing seen.

146	    2015/07/20	 137 Cs	     320k	1120
147	    2015/07/20	 137 Cs	     106k	1170

148	    2015/07/22	 137 Cs      1M		1120			Most events are due to pedestals being above readout threshold
149	    2015/07/22   137 Cs      1M		1120			Long run, good data.
150	    2015/07/22	 137 Cs      2.2M	1150			Long run, good data. Threshold higher than run 149.
153	    2015/08/06	 133 Ba	     38927	1170			Run over 24 hours to get 133Ba data.