#! Run type:: PHYSICS_8 Config:: TRG_FCAL_BCAL_m8_b1bf1.conf #! CONFIG FILE:: /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/TRG_FCAL_BCAL_m8_b1bf1.conf #! (Re)Created:: on Wed Apr 29 12:06:51 EDT 2015 #! # DSC2_WIDTH 20 40 <- TDC width (ns), TRG width (ns) # DSC2_THRESHOLD 20 50 <- board threshold: TDC threshold (mV), TRG threshold (mV) # # TS_TRIG_TYPE 1 - Internal Pulser # 2 - External FP # 4 - GTP # 6 - GTP + External # # # TS_FP_INPUTS - List of enabled FP inputs # # # TS_SOFT_TRIG # Trigger type (type 1 or 2 for playback) # Number of events to trigger # Period multiplier (depends on range 0-0x7FFF) # Range 1 - min 120ns, increments of 30ns up to 983.13u # 2 - min 120ns, increments of 30.72us up to 1.007s # # # TI_MASTER 1 - Stand alone with master TI # # TI_MASTER_TRIG 1 - soft, 2 - external pulser, 3 - playback # # TI_SOFT_TRIG # Trigger type (type 1 or 2 for playback) # Number of events to trigger # Period multiplier (depends on range 0-0x7FFF) # Range 1 - min 120ns, increments of 30ns up to 983.13u # 2 - min 120ns, increments of 30.72us up to 1.007s # # F1TDC_CLOCK 0 <- Clock Source (0 = Internal 32 MHz) # (1 = External 31.25 MHz) # F1TDC_VERSION 2 <- Module Version (2 = High Resolution, synchronous, 32 channels) # (3 = Normal Resolution, synchronous, 48 channels) # set bin size from 0.056 to 0.058 -> Beni! # F1TDC_BIN_SIZE 0.058 <- Bin size (ns) # F1TDC_LATENCY 3000.0 <- Trigger latency (ns) # F1TDC_WINDOW 1000.0 <- Trigger window (ns) ========================== TRIGGER ========================== #CALIBRATION 1 # TS_TRIG_TYPE 2 TS_TRIG_TYPE 4 TS_FP_INPUTS 3 9 10 12 #TS_FP_DELAY 9 24 #TS_FP_DELAY 10 50 #TS_FP_DELAY 9 27 #TS_FP_DELAY 10 53 #04/15/2016 TS_FP_DELAY 9 23 TS_FP_DELAY 10 44 TS_FP_DELAY 3 427 TS_SOFT_TRIG 1 0 0x1F 1 TS_TD_SLOTS 14 3 #PS SSP_SLOT 5 0x02 0 # TYPE DELAY INT_WIDTH ENABLE TRIG_EQ PS 35 10 1 TRIG_EQ BCAL_E 12 20 1 TRIG_EQ BCAL_C 20 0 0 TRIG_EQ FCAL 8 10 1 TRIG_EQ ST 31 3 1 TRIG_EQ TOF 20 10 0 TRIG_EQ TAGH 106 0 1 # TYPE LATENCY WIDTH FCAL_E BCAL_E EN_THR NHIT LANE FCAL_EMIN FCAL_EMAX BCAL_EMIN BCAL_EMAX PATTERN TRIG_TYPE BFCAL 440 5 25 1 45000 0 -1 200 65535 0 65535 TRIG_TYPE PS 440 5 1300 1900 1100 0 3 #TS_GTP_PRES 0 2 TRIG_DELAY 0 DAC_CALIB 0 TI_FIBER_LATENCY_OFFSET 0x98 TS_COIN_WIND 15 # TEST 2, THR = 3 TS_TRIG_HOLD 1 10 0 TS_TRIG_HOLD 2 127 0 TS_TRIG_HOLD 4 40 0 TS_TRIG_HOLD 3 2 1 # TS_SYNC_INT 1000 # 2/7/16 changed to 5000 TS_SYNC_INT 5000 TI_MASTER 0 TI_MASTER_TRIG 1 TI_FP_INPUTS 3 # TI_SOFT_TRIG 1 10000 0x7FFF 1 TI_SOFT_TRIG 1 10000 0x600 1 BLOCKLEVEL 40 BUFFERLEVEL 4 ========================== GLOBAL ========================== F1TDC_BIN_SIZE 0.058 FADC250_BUSY 3 FADC125_BUSY 3 FADC250_FORMAT 2 FADC125_FORMAT 1 ========================== PS ========================== FADC250_MODE 9 # FADC250_W_OFFSET 850 # Changed from 850 to 835 (12/15/16) FADC250_W_OFFSET 835 FADC250_W_WIDTH 100 FADC250_NSB 3 FADC250_NSA 10 FADC250_NPEAK 3 FADC250_READ_THR 130 FADC250_TRIG_BL 100 FADC250_TRIG_THR 200 FADC250_TRIG_NSB 3 FADC250_TRIG_NSA 15 FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default FADC250_COM_VER default FADC250_USER_DIR /home/somov/conf/cosmic FADC250_USER_VER ========================== PSC ========================== FADC250_MODE 9 #FADC250_W_OFFSET 850 # Changed from 850 to 835 (12/15/16) FADC250_W_OFFSET 835 FADC250_W_WIDTH 100 FADC250_NSB 3 FADC250_NSA 6 FADC250_NPEAK 3 FADC250_READ_THR 150 FADC250_TRIG_BL 100 FADC250_TRIG_THR 150 FADC250_TRIG_NSB 3 FADC250_TRIG_NSA 6 # F1 TDC F1TDC_WINDOW 600 F1TDC_LATENCY 3540 F1TDC_CLOCK 1 # LE discriminator DSC2_WIDTH 20 40 DSC2_THRESHOLD 40 40 ========================== TPOL ========================== FADC250_MODE 11 # Sebastian, Alex increase from 795 to 832 12/19/2017 FADC250_W_OFFSET 832 # Sebastian, Alex increase from 100 to 150 12/19/2017 FADC250_W_WIDTH 150 # Changed 01/23/18 Sebastian, Beni #FADC250_W_WIDTH 500 #Switched back to 150 1/26/18 FADC250_NSB 3 FADC250_NSA 10 FADC250_NPEAK 1 # FADC250_READ_THR 133 # Changed 12/16/16 #FADC250_READ_THR 160 # Changed 02/04/17 #FADC250_READ_THR 150 # Changed 01/23/18 Sebastian, Beni FADC250_READ_THR 150 #Switched back to 150 1/26/18 FADC250_TRIG_BL 100 FADC250_TRIG_THR 500 FADC250_TRIG_NSB 3 FADC250_TRIG_NSA 6