#
#
# Hosts that various CODA components should run on.
# Format is:
#
#    component_name  hostname
#
# e.g. 
#        PEB0   gluon53
#
# Components that are not explicitly listed here
# will be started on the node that the startup
# script is run from. ROCs should not be set here
# and will be ignored if they are. For ROCs, the
# component name always corresponds to the node
# and so is always used to start the coda_roc
# process on the remote node. 
#
#
#--  hd_all_mc  --
#
#
#   platfotm gluon46 hardcoded for epics 
platform   gluon151
#
#RC        gluon46
#
DCFDC      gluon50
DCFDC2     gluon50
#
DCFCAL     gluon50
DCFCAL2    gluon50
#
DCCDCSTPS  gluon50
DCTAG      gluon50
#
DCBCAL     gluon50
DCBCAL2    gluon50
#
#
#
# FCSgluon47 gluon47


PEB0       gluon50
#
SEB0       gluon50

ERsoftROC  gluon151
ERraid0    gluon151

#---  2 streams only !! ---

SEB1       gluon50
ERraid1    gluon151

#-----------
# 
# USE_RAMDISK - Set this to "yes" for files to be written to
#               to the RAM disk on the node where the ERsoftROC
#               is running. If set to "no", files will be written
#               to rotating RAID partitions. (Partition will be
#               rotated between runs). HOSS (online skims) will
#               only run if this is set to "yes".
#
# USE_LOCAL   - Set this to "yes" to have coda state transition
#               scripts run on the node where the ERsoftROC is
#               being run. If set to "no", the scripts will all be
#               run on the node where the platform is running.
#               Usually you'll want this set to "yes".
#
# USE_4part   - This is an option for CDAQ (not CODA) that tells
#               it to write 4 streams simultaneously. This will
#               maximize the overall write rate for CDAQ. It will
#               have no affect if running CODA.

USE_RAMDISK yes
USE_LOCAL  yes
USE_4PART  no

#--- end ---

MONITOR  yes
#MONITOR  no

#HOSS yes
HOSS no