#! Run type:: PHYSICS_8 Config:: TRG_FCAL_BCAL_m8_b1bf1.conf #! CONFIG FILE:: /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/TRG_FCAL_BCAL_m8_b1bf1.conf #! (Re)Created:: on Wed Apr 29 12:06:51 EDT 2015 #! # DSC2_WIDTH 20 40 <- TDC width (ns), TRG width (ns) # DSC2_THRESHOLD 20 50 <- board threshold: TDC threshold (mV), TRG threshold (mV) # # TS_TRIG_TYPE 1 - Internal Pulser # 2 - External FP # 4 - GTP # 6 - GTP + External # # # TS_FP_INPUTS - List of enabled FP inputs # # # TS_SOFT_TRIG # Trigger type (type 1 or 2 for playback) # Number of events to trigger # Period multiplier (depends on range 0-0x7FFF) # Range 1 - min 120ns, increments of 30ns up to 983.13u # 2 - min 120ns, increments of 30.72us up to 1.007s # # # TI_MASTER 1 - Stand alone with master TI # # TI_MASTER_TRIG 1 - soft, 2 - external pulser, 3 - playback # # TI_SOFT_TRIG # Trigger type (type 1 or 2 for playback) # Number of events to trigger # Period multiplier (depends on range 0-0x7FFF) # Range 1 - min 120ns, increments of 30ns up to 983.13u # 2 - min 120ns, increments of 30.72us up to 1.007s # # F1TDC_CLOCK 0 <- Clock Source (0 = Internal 32 MHz) # (1 = External 31.25 MHz) # F1TDC_VERSION 2 <- Module Version (2 = High Resolution, synchronous, 32 channels) # (3 = Normal Resolution, synchronous, 48 channels) # set bin size from 0.056 to 0.058 -> Beni! # F1TDC_BIN_SIZE 0.058 <- Bin size (ns) # F1TDC_LATENCY 3000.0 <- Trigger latency (ns) # F1TDC_WINDOW 1000.0 <- Trigger window (ns) # # # DIRC configuration # # 3 SSP modules # SSP - 32 FIBERS # FIBER - 3 ASICS # ASIC - 1 DAC setting (threshold) # 64 CHANNELS (64 GAINS) # # In the DIRC section, global parameters are set for all SSP modules # # Individual GAINS and DAC values can be set (overwritten) in the file: # /gluex/CALIB/ALL/ssp/default/rocdirc_ssp_default.cnf # # # SSP_FIBER_W_WIDTH Width and Position of the read out windoe # SSP_FIBER_W_OFFSET # # SSP_MAROC_REG_DAC0 DAC values for each ASIC (thresholds) # (range: 0 - 1023) # # SSP_MAROC_REG_GAIN_0_15 Value # Gains for channels 0 - 15 # Gain range: 0 - 4 (Value range: 0 - 255, 64 corresponds to gain = 1) # # # Enable Charge Injection (Test mode) # # SSP_CTEST_ENABLE 1 - enable, 0 - disable # SSP_CTEST_DAC Charge amplitude # SSP_PULSER Pulser frequency # SSP_MAROC_REG_CTEST Mask of enabled channels # # ========================== TRIGGER ========================== #CALIBRATION 1 TS_TRIG_TYPE 1 TS_FP_INPUTS 3 9 10 12 #04/15/2016 TS_FP_DELAY 9 23 TS_FP_DELAY 10 44 TS_FP_DELAY 3 427 TS_SOFT_TRIG 1 65535 0x5F 1 TS_TD_SLOTS 4 # SSP SLOT FIBER_EN SUM_ENABLE SSP_SLOT 8 0xFF 1 SSP_SLOT 9 0x3F 1 # TYPE DELAY INT_WIDTH ENABLE # Spring 2017 initial TRIG_EQ PS 35 10 0 TRIG_EQ BCAL_E 12 20 0 TRIG_EQ BCAL_C 20 0 0 TRIG_EQ FCAL 8 10 0 TRIG_EQ ST 31 3 0 TRIG_EQ TOF 20 10 0 # Change ST time to from 30 to 31 and TAGH delay from 105 to 106 TRIG_EQ TAGH 106 0 0 # TYPE LATENCY WIDTH FCAL_E BCAL_E EN_THR NHIT LANE FCAL_EMIN FCAL_EMAX BCAL_EMIN BCAL_EMAX PATTERN TRIG_TYPE BFCAL 440 5 25 1 45000 0 -1 200 65535 0 65535 #TS_GTP_PRES 0 10 TRIG_DELAY 0 DAC_CALIB 0 TI_FIBER_LATENCY_OFFSET 0x98 TS_COIN_WIND 15 # TEST 2, THR = 3 TS_TRIG_HOLD 1 10 0 TS_TRIG_HOLD 2 127 0 TS_TRIG_HOLD 4 40 0 TS_TRIG_HOLD 3 2 1 TS_SYNC_INT 5000 TI_MASTER 0 # BLOCKLEVEL 40 # BUFFERLEVEL 4 BLOCKLEVEL 1 BUFFERLEVEL 1 ========================== GLOBAL ========================== F1TDC_BIN_SIZE 0.058 FADC250_BUSY 3 FADC125_BUSY 3 FADC250_FORMAT 2 FADC125_FORMAT 1 ========================== DIRC ========================== SSP_FIBER_W_WIDTH 1000 SSP_FIBER_W_OFFSET 1000 SSP_REG_GLOBAL0 0x69306B87 SSP_REG_GLOBAL1 0x0 SSP_MAROC_REG_DAC0 500 SSP_MAROC_REG_DAC1 0 SSP_MAROC_REG_GAIN_0_15 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 SSP_MAROC_REG_GAIN_16_31 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 SSP_MAROC_REG_GAIN_32_47 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 SSP_MAROC_REG_GAIN_48_63 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 SSP_MAROC_REG_SUM 0x00000000 0x00000000 SSP_MAROC_REG_MASKOR 0x00000000 0x00000000 SSP_TDC_ENABLE 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF # Charge injection # SSP_CTEST_ENABLE 0 # SSP_CTEST_DAC 1000 # SSP_PULSER 1000000 # SSP_MAROC_REG_CTEST 0x00000000 0x00000000 # Charge injection SSP_CTEST_ENABLE 1 SSP_CTEST_DAC 1000 SSP_PULSER 500000 SSP_MAROC_REG_CTEST 0x10000001 0x00000000 SSP_COM_DIR /gluex/CALIB/ALL/ssp/default SSP_COM_VER default