#! Run type:: PHYSICS_8 Config:: TRG_FCAL_BCAL_m8_b1bf1.conf #! CONFIG FILE:: /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/TRG_FCAL_BCAL_m8_b1bf1.conf #! (Re)Created:: on Wed Apr 29 12:06:51 EDT 2015 #! # DSC2_WIDTH 20 40 <- TDC width (ns), TRG width (ns) # DSC2_THRESHOLD 20 50 <- board threshold: TDC threshold (mV), TRG threshold (mV) # # TS_TRIG_TYPE 1 - Internal Pulser # 2 - External FP # 4 - GTP # 6 - GTP + External # # # TS_FP_INPUTS - List of enabled FP inputs # # # TS_SOFT_TRIG # Trigger type (type 1 or 2 for playback) # Number of events to trigger # Period multiplier (depends on range 0-0x7FFF) # Range 1 - min 120ns, increments of 30ns up to 983.13u # 2 - min 120ns, increments of 30.72us up to 1.007s # # # TI_MASTER 1 - Stand alone with master TI # # TI_MASTER_TRIG 1 - soft, 2 - external pulser, 3 - playback # # TI_SOFT_TRIG # Trigger type (type 1 or 2 for playback) # Number of events to trigger # Period multiplier (depends on range 0-0x7FFF) # Range 1 - min 120ns, increments of 30ns up to 983.13u # 2 - min 120ns, increments of 30.72us up to 1.007s # # F1TDC_CLOCK 0 <- Clock Source (0 = Internal 32 MHz) # (1 = External 31.25 MHz) # F1TDC_VERSION 2 <- Module Version (2 = High Resolution, synchronous, 32 channels) # (3 = Normal Resolution, synchronous, 48 channels) # set bin size from 0.056 to 0.058 -> Beni! # F1TDC_BIN_SIZE 0.058 <- Bin size (ns) # F1TDC_LATENCY 3000.0 <- Trigger latency (ns) # F1TDC_WINDOW 1000.0 <- Trigger window (ns) ========================== TRIGGER ========================== #CALIBRATION 1 TS_TRIG_TYPE 4 TS_FP_INPUTS 3 9 10 12 #TS_FP_DELAY 9 24 #TS_FP_DELAY 10 50 #TS_FP_DELAY 9 27 #TS_FP_DELAY 10 53 #04/15/2016 TS_FP_DELAY 9 23 TS_FP_DELAY 10 44 TS_FP_DELAY 3 427 TS_SOFT_TRIG 1 0 0x1F 1 TS_TD_SLOTS 3 14 # SSP SLOT FIBER_EN SUM_ENABLE # SSP_SLOT 8 0xFF 1 # SSP_SLOT 9 0x3F 1 # SSP_SLOT 10 0x3F 1 #PS SSP_SLOT 5 0x02 0 # SSP for ST # SSP_SLOT 6 0x1 0 # TYPE DELAY INT_WIDTH ENABLE TRIG_EQ PS 35 10 1 TRIG_EQ BCAL_E 15 20 0 TRIG_EQ BCAL_C 20 0 0 TRIG_EQ FCAL 8 10 0 TRIG_EQ ST 30 10 0 TRIG_EQ TOF 20 10 0 # TYPE LATENCY WIDTH FCAL_E BCAL_E EN_THR NHIT LANE FCAL_EMIN FCAL_EMAX BCAL_EMIN BCAL_EMAX PATTERN TRIG_TYPE BFCAL 440 5 10 2 18000 0 -1 200 65535 0 65535 TRIG_TYPE BFCAL 440 5 0 1 25000 0 -1 # Changed 03/31/16 #TRIG_TYPE BFCAL 440 5 0 1 18000 0 2 TRIG_TYPE PS 440 5 1300 1900 1100 0 3 TRIG_TYPE BFCAL 440 5 20 1 36000 0 -1 200 65535 0 65535 TRIG_TYPE BFCAL 440 5 1 0 900 0 -1 TRIG_TYPE ST 440 5 1300 1900 1100 1 -1 TRIG_TYPE BCAL_COS 440 40 1500 2100 1300 0 -1 #TS_GTP_PRES 6 1 #TS_GTP_PRES 0 2 #TS_GTP_PRES 1 2 #TS_GTP_PRES 2 2 #TS_GTP_PRES 3 2 #TS_GTP_PRES 0 10 #TS_GTP_PRES 1 5 #TS_GTP_PRES 2 5 TRIG_DELAY 0 DAC_CALIB 0 TI_FIBER_LATENCY_OFFSET 0x98 TS_COIN_WIND 15 # TEST 2, THR = 3 TS_TRIG_HOLD 1 10 0 TS_TRIG_HOLD 2 127 0 TS_TRIG_HOLD 4 40 0 TS_TRIG_HOLD 3 2 1 # TS_SYNC_INT 1000 # 2/7/16 changed to 5000 TS_SYNC_INT 5000 TI_MASTER 0 TI_MASTER_TRIG 1 TI_FP_INPUTS 3 # TI_SOFT_TRIG 1 10000 0x7FFF 1 TI_SOFT_TRIG 1 10000 0x600 1 BLOCKLEVEL _BLOCKLEVEL_ BUFFERLEVEL _BUFFERLEVEL_ ========================== GLOBAL ========================== F1TDC_BIN_SIZE 0.058 FADC250_BUSY 3 FADC125_BUSY 3 # FADC250_FORMAT 2 ========================== TRD ========================== FADC125_MODE 8 FADC125_W_OFFSET 130 FADC125_W_WIDTH 100 FADC125_IE 200 FADC125_NPEAK 1 FADC125_PG 4 FADC125_P1 4 FADC125_P2 4 FADC125_IBIT 4 FADC125_ABIT 3 FADC125_PBIT 0 FADC125_TH 20 FADC125_TL 15 FADC125_THR 10 FADC125_DAC 36864 #FA125_THRESHOLD_FACTOR 8 FADC125_COM_DIR /gluex/CALIB/ALL/fadc125/default FADC125_COM_VER default FADC125_USER_DIR /gluex/ FADC125_USER_VER